Blog Posts

In our security and firewall services offered to customers for whom business continuity is of great importance, in addition to special devices positioned for service delivery and software produced specifically for the job, services are also obtained from major internet operators.

Netinternet aims to ensure that all management in all technically possible areas of the services provided is in the hands of our users in order to offer the best service experience. Voxility is one of the operators from which we receive services for DDoS prevention purposes. Netinternet allows you to view/edit IP management in terms of firewall, attack reports, and attack logs for your IP addresses announced in Voxility systems from your customer panel.

If you have a Firewall service and your IP address is announced at the Voxility operator, you can see the Voxility Management table in the Applications > IP Management section of your Netinternet customer panel. You must switch to IP Management to change the DDoS protection options for your IP addresses, and to Attack Records to view DDoS attacks launched towards your IP addresses and access log records.

IP Management
Allows you to view the list of IPs under your management along with protection options as shown in the table above. The meanings of the data in the table are below;

Other Operators: More than one operator provides data center internet access. If other operators related to your IP address appear as “Open”, it means your IP announcements are not only made through Voxility, therefore attacks that may come through other operators connected to the data center will not be filtered through Voxility. However, when your IP announcements are announced through Voxility, all access outside of Turkey passes through Voxility.

Status: Shows the current service status, can take two values as “Sensor” or “Always-on”. Sensor indicates that DDoS filtering is not being done, but that it will switch to active protection, i.e., Always-on mode, if any DDoS is initiated. Always-on shows that all incoming requests are filtered regardless of what they are.

Protection Selection: Can take two values as “Sensor” or “Always-on” at your choice. Sensor does not filter incoming requests, only provides protection when DDoS is initiated; Always-on filters all incoming requests regardless of what they are. Constantly using Always-on may slow down your network traffic and cause errors. We do not recommend constant use of Always-on mode. In extraordinary situations, you can manually activate the protection mode this way.

Layer7 Mode: Provides protection at Layer7 level. The best protection is provided with this mode being active, and having the Layer7 service active also slightly slows down network traffic. When Layer7 is active, while simple http-get attacks are blocked with session control, all file transfers towards your network are also protected at the network level against known viruses, trojans, backdoors, sql injection and similar malware and requests.

Layer7 SSL Mode: Allows the same features as Layer7 to be applied to encrypted SSL traffic as well. For this, you need to perform the “SSL Setup” operation through the “Edit” menu. If you do not do this, a default but non-valid SSL certificate will be used in place of SSL certificates used in all your encrypted traffic. You can define one SSL for each IP address.

Operation: You can upload the necessary files for “SSL Setup” through the “Edit” menu in the operations table, and change the “Protection Selection”, “Layer7 Mode”, “Layer7 SSL Mode” options in the table through the “Options” section.

Attack Records
This section lists DDoS attacks launched towards IP addresses in the selected IP range in your IP management in the last 2 days. The meanings of the data in the table are below;

Attack Recipient: Shows the IP address under attack in the selected IP range.

Start: Shows the date the attack started in UTC format. You need to add +3 hours to evaluate according to Turkey time.

Duration: Indicates the duration of the attack; if the attack is ongoing, it shows this additionally with the “Ongoing” statement in the duration table.

Action: Shows the filtering method of the attack. This table takes the values “Filter ON”, “Filter always ON”. Filter ON shows a transition from sensor mode, Filter always ON shows a transition from continuous protection.

Attack Type: This is the technical information screen about the incoming attack. It is for professional users.

Details: A sample 300-line log record related to the incoming attack is displayed from the “View” section in this table. A sample view is below.

The meanings of the data in the table for the sample log record displayed above are below;

Nano Time: Shows the time the log record was taken in UTC format in nanoseconds.

Source IP:Port: Shows the IP address from which the attack was initiated and the outgoing port.

Destination IP:Port: Shows the IP address under attack and the port.

Other Fields: For professional users. “TCP Flags”, “Length IP”, “Payload”, “Proto”

The “IP Announcement Management” feature, which allows customers who have IP addresses large enough to manage announcements (Minimum single /24, 265 IPs) and receive Firewall service to manage their own announcements, has been integrated into our system.

If you have an IP subnet of /24 size, when you go to the Applications section on the Netinternet customer panel, you will reach the screen above in the IP Management screen for your /24 IP blocks.

Changes to be made are sent directly to the Backbone Router and operations are performed instantly. Updating BGP Route tables across all the World for BGP announcements changed by you may take some time. Operations performed can create temporary momentary interruptions.

Meanings of values in the table;

Telekom: Shows whether your IP address is announced to the Turk Telekom MPLS network and Turk Telekom DDoS services. To make a change, simply click on the colored area that says Open/Closed.

Voxility: Shows whether your IP address is announced on the foreign operator Voxility and in Voxility DDoS services. To make a change, simply click on the colored area that says Open/Closed.

Telekom International: You have the authority to restrict international announcement on the Turk Telekom network. When you open this feature, requests from foreign operators through the Turk Telekom network are cut off. If you want no access from abroad at all, this field must be “Closed” and the Voxility announcement must also be “Closed”. While your IP addresses are announced at a foreign operator, you technically cannot restrict international access. Again, simply click on the colored area that says Open/Closed to make changes.

Voxility Exception: Netinternet network automation systems automatically change IP announcements in extraordinary situations. If you do not want automation to announce you to the Voxility operator under any circumstances, you need to set this feature to “Open”. Again, simply click on the colored area that says Open/Closed to make changes.

Additional Information: If you do not have a Firewall service, you can view the current announcement status but cannot make changes.
 

Along with 2019, we made an update that will please our customers at a time when the AKN (fair use point) has been removed in our country and is being heavily discussed.

With the spread of broadband internet access at home and in workplaces and the spread of 4.5G speed in our country, websites have started to consume more traffic than before. Projects and websites that keep up with developing technology sometimes had to use servers even if they did not need them, just to meet the increasing traffic consumption. To prevent projects from using servers solely due to high traffic consumption and to provide cost benefits, we reviewed and significantly increased the traffic limits in our web hosting and reseller hosting packages. You will now be able to use much higher traffic limits at the same prices in our web hosting and reseller hosting packages.

The old and new package comparisons for our packages with traffic updates are as follows.

Web Hosting Services

Reseller Hosting Services

These updated traffic limits are also valid for active services of our existing customers. Update operations have been completed on all servers and packages.

Netinternet wishes you high-traffic days :)

To access the Opencart admin panel, we log in with our Username and Password through the admin panel at www.yourdomain.extension/admin.

1) After logging into the admin panel, we expand the menu by clicking the icon at the top left, then click the System button.

2) In the section that opens, we click on the edit settings step in the form of a pencil icon on the left side.

3) In this step, we click on the Mail section indicated by the red area at the top.

After making these settings, your Opencart mail settings will have been successfully completed.

Step 1: For email setup, first go to the Add Account section as shown in the screenshot above.

Step 2: From the options that appear, choose the option that says Other.

Step 3: On the next screen, choose the add mail account option.

Step 4: Enter the name that will appear for your mail address in the Name field. Enter your mail address and that mail’s password in the field just below. This is not a field where you can change the mail address password. This is the field where you will enter your mail address you want to set up and its password.

Step 5: In the next step, after choosing POP from the options in the menu that appears, you can make your settings.
Enter the First and Last Name information for your email account.
Email: Enter the mail account you want to set up and have activated from your management panel.

Incoming & Outgoing Mail Server

Server Name: You must write mail.yoursite.com in this field, but you must replace yoursite.com with your own website address.

Username: You need to write the mail address you want to set up.
Password: You need to enter the password of the mail address you want to set up.

After these settings, when you press the save button, a screen related to server verification failure will appear.

On this screen that appears, continue by pressing the continue button.

On the screen containing your mail account settings, go to the Advanced link at the bottom.

Turn off the Use SSL setting and set the Server Port to 110. You have made these settings for Incoming Mail Settings, now let us also look at the necessary adjustments for Outgoing Mail settings.

For the outgoing mail server, you must write mail.yoursite.com for the server name. But instead of yoursite.com, you must write your own website address.

Enter the mail address you set up in the username field.
Turn off the Use SSL feature.
The Server Port should be 587.

After these settings, you can complete the process by pressing the save button.

Step 1: In the email setup section, enter your “Email” address and “password”, then click the next button.

Step 2: In the add email account section, click the “POP 3 account” button.

Step 3: In the incoming server settings section,

• Username: your email address


• Password: your email address password


• Security Type: None


• Port: 110


• Click the next button.

Step 4: In the outgoing email server settings section;
SMTP server: mail.sitename.com (e.g.; mail.netinternet.com.tr)
Security Type: None
Click the next button.

Step 5: You can set the email check frequency from the account options section.

Step 6: You can give a name to the email account you set up.

Dear Friends;

We are experiencing the pride and happiness of leaving behind yet another year full of success. The year 2017, which passed in a very challenging manner with its ups and downs, will remain among the years we will always be proud of from a commercial perspective… Despite all the challenges and adversities we faced, this year we achieved growth above the targeted growth rate, proving our strength once again in every field.

Click to view the infographic describing 2017 in numbers.

One of the biggest contributors to this determined, stable growth is you, our valued friends. With the strength we draw from you, we have already prepared our plans to perfect our services and offer a unique service experience to you, our valued and loyal customers, with brand new projects.

Among our goals for this year, in addition to the work of perfecting our existing services, new and unique services will be presented to you in the first quarter of 2018. You can quickly learn about our innovations, updates and all news about our company by following our social media accounts.

We wish 2018 to bring happiness, health and prosperity to all of us.

May 2018 be your year!

On Behalf of the Entire Netinternet Team..

With our love.

Netinternet Bilisim Teknolojileri AS

General Manager - Osman MAKAL

Inode Limit

An inode (index node) contains metadata information (file structure, file size, etc.).
The inode limit contains data structure information found in the Linux operating system. The inode count refers to the number of files in your account. That is, each file (email, image, etc.) in your hosting account means one inode. The total of all files in your account makes up the inode count.

How Can I Reduce the Inode Count?

To reduce the inode count, it will be sufficient to remove unnecessary files from your account.

Inode Information on cPanel

It is located in the Statistics section of the cPanel main menu.

Dear Customers,

Throughout our 11 years of commercial activity, the largest customers of our company have always been businesses providing hosting services for commercial purposes. We have initiated a process to separate all our customers receiving services at the wholesale level from Netinternet and have them receive services through our other company, Veri Merkezi Teknolojileri, which is a 100% Netinternet subsidiary, in order to provide more specialized service to these businesses, coordinate our teams accordingly, and have more favorable price tariffs at the wholesale level.

This change has been made/planned entirely in accordance with the requests, complaints and needs of our customers receiving services at the wholesale level, with the aim of meeting all technical and administrative needs fully and flawlessly through a control panel written for web hosting companies, and maintaining business continuity at the highest level with a dedicated technical team to manage this process.

As a result of all these efforts, Veri Merkezi Teknolojileri, which will also begin serving with multiple locations, will again ensure that the gap between us and our competitors in terms of price/performance opens up boundlessly in recent years.

Information about Veri Merkezi Teknolojileri;

Website: www.verimerkezi.com.tr

Facebook: facebook.com/verimerkezi

Twitter: twitter.com/verimerkezi

You can get detailed information about this entire process through your customer representative.

We present this for your information and wish you profitable days.

Netinternet Bilisim Teknolojileri AS

General Manager - Osman MAKAL